What should you know before you buy an acrylic sheet in Singapore?
What acrylic sheet is, the thicknesses and full-sheet size sold in Singapore, which finish suits which job, and where to buy it or get it cut.
On this page
- Acrylic thickness and what each suits
- What acrylic sheet is
- Finishes: clear, frosted, coloured, mirror and opal
- Cast or extruded: two ways to make a sheet
- Sizes and thicknesses sold in Singapore
- Where to buy acrylic sheet in Singapore
- Getting acrylic cut to size
- Printed and cut acrylic: what we make
- More on acrylic
- Where these facts come from
- Frequently asked
How many pieces from one acrylic sheet?
Enter your piece size and how many you need. The tool lays them out in a grid and weighs the job.
Weight uses the sheet maker's figure of 2.4 kg a square metre at 2 mm, which is 1.2 kg a square metre for each millimetre. A shop's own sheet can weigh a little less. Layout is a simple grid with 5 mm between pieces; a cutter may fit a few more.
Acrylic sheet is a clear, glossy plastic, polymethyl methacrylate (PMMA), sold by thickness, finish and sheet size. The full sheet at the Singapore supplier we checked is 1.22 by 2.44 m, and most jobs need a fraction of that cut to size. The table below puts each thickness next to the jobs it suits.
Acrylic thickness and what each suits
| Thickness | What to know | Where we use it |
|---|---|---|
| 1.5 mm | Thin and light | Small printed pieces and keychains from our print studio |
| 2 mm | The thickness of mirror sheet | Gold mirror logo lettering |
| 3 mm | The thickness of the panels and boards below | Cover panels, case panels, printed boards, small signs |
| 5 mm | Thick enough that the edge shows | Logo letters cut one by one, then primed and sprayed |
| 10 mm | A chunky, glowing edge | Freestanding letters and thick signs |
| 12 to 25 mm | The thickest we cut | Freestanding letters and thick display pieces: ask us first |
We cut plain acrylic from 3 mm up, and our print studio adds a thin 1.5 mm sheet for small printed pieces. Mirror is the other exception: the mirror sheet we cut is about 2 mm, as in the sign below, and our sign studio sells it as its 3 mm option. Supplier ranges are wider. One Singapore hardware supplier lists 2 to 6 mm, and an acrylic supplier lists clear sheet from 2 to 20 mm.
What acrylic sheet is
PMMA lets through up to 92% of visible light, which is why it is used where glass would otherwise go. It weighs about half as much as glass. In most uses it does not shatter. It breaks into large, dull pieces.
Its limit is the surface. Acrylic is softer than glass and scratches more easily, though a scratch can be sanded and polished out. It can also crack if it is knocked.
The material is sold under brand names, which the post on acrylic, Perspex and Plexiglas sorts out. It is not polycarbonate, which is tougher and handled differently: see acrylic vs polycarbonate.
Finishes: clear, frosted, coloured, mirror and opal
Clear is the one most people mean by acrylic. Frosted has a matt surface, a look like sandblasted or etched glass, and it hides what sits behind it. Coloured comes solid, or see-through in a tint, so overlapping tinted panels mix new shades where they cross. Mirror has a metallic face in gold, silver or rose gold. Opal is a milky white that spreads light, so it suits light boxes.
- Matt on one side or both. Some frosted sheet is matt on one face only. Ask which.
- Mirror comes thin. The mirror sheet one Singapore supplier lists is 2 mm.
- Opal is not clear. It passes up to 67% of the light, and the haze is what gives the even glow.
The plaque at the top of this page layers a frosted engraved panel over tinted blue, green, red and orange acrylic. The sign below is cut from 2 mm gold mirror.

Cast or extruded: two ways to make a sheet
A cast sheet is made by pouring liquid methyl methacrylate between two sheets of glass and letting it set. An extruded sheet is made from melted plastic pressed through a die and rolled to thickness.
- Cast suits machining and a clean cut edge. It is sold in a wider range of colours and finishes.
- Extruded is more even in thickness and costs less. It is the usual choice for forming into shapes, and it laser cuts easily.
- Clarity differs a little. Cast is the clearer of the two.
Shop listings often say only “acrylic”. Ask which one it is before you order. On signs we specify the sheet when we quote, from how the sign will be seen: a visible cut edge points to cast. For other pieces, ask which sheet we would use.
Sizes and thicknesses sold in Singapore
A full sheet is 4 ft by 8 ft (1.22 by 2.44 m) at the supplier we checked, with 4 ft by 6 ft as the other size. The same supplier sells clear and opaque white in 2 to 6 mm. A clear 3 mm full sheet weighs 9.92 kg.
One online cutting service lists clear sheet from 2 to 10 mm. It offers two finishes, laser-cut and polished, and says only the laser-cut finish is available for custom shapes, round corners and drilled holes.
Where to buy acrylic sheet in Singapore
These sellers publish their own range. Prices change, so ask each one.
- Horme Hardware lists clear and opaque white sheet in 4 ft by 8 ft and 4 ft by 6 ft, 2 to 6 mm, with delivery to lift-landing level.
- AD People lists cast and extruded clear sheet from 2 to 20 mm, black and white in 3 to 5 mm, and 2 mm mirror in gold, silver and rose gold. It takes small orders on standard sizes.
- San Seng lists clear and coloured sheet, including tints, frost, sand-blasted, metallic and mirror finishes. It asks you to enquire.
- Acrylic Factory (acrylic.com.sg) cuts to your size online, in a laser-cut or polished finish, with round corners and drilled holes.
A supplier is the right call when you want a plain sheet or a plain rectangle. We make the pieces that need more.
Getting acrylic cut to size
You have three routes.
- Cut it yourself. Sheet up to 4 mm can be scored and snapped by hand. Thicker sheet needs a saw. Keep the masking film on while you cut. Our guide to how to cut acrylic goes through it.
- Order it cut. A supplier cuts rectangles and circles to a size you give.
- Send us a file. We laser cut acrylic from 3 to 25 mm (mirror sheet is about 2 mm), to within 0.1 mm, from a DXF, AI, SVG or PDF. Cutting is priced by the A4 piece: see pricing.

Printed and cut acrylic: what we make
We print full colour straight onto acrylic, then cut the shape along the artwork. The UV print studio takes pieces up to A4; for anything bigger, ask us. The sample boards below are 3 mm acrylic, cut with rounded corners and a hole for a marker clip, then printed.

Signs are a separate route. Our acrylic sign studio takes a logo in 3, 5 or 10 mm, with gold or silver mirror as an option.
More on acrylic
- Stands, cases and frames: acrylic stands, acrylic display cases, acrylic photo frames.
- Mirror, gluing and cutting: acrylic mirror, how to glue acrylic, how to cut acrylic.
- Small pieces: acrylic keychains, name plates and name tags and badges.
- Choosing the plastic: acrylic, Perspex and Plexiglas and acrylic vs polycarbonate.
- Signs: our acrylic signage buyer’s guide.
Where these facts come from
Every outside fact was read on the source’s own page on 19 November 2026. Sizes and ranges change, so check the seller before you order.
- Polyvantis, What is PLEXIGLAS, Manufacturing and Cutting PLEXIGLAS: PMMA, light transmission, weight, cast and extruded sheet, masking film, scoring thin sheet.
- Perspex Distribution, cast acrylic, extruded acrylic, Frost and Opal: frosted and opal finishes, cast against extruded, the largest sheet.
- Wikipedia, poly(methyl methacrylate): how it breaks, scratching, and cast sheet for machining.
- Horme Hardware, AD People, San Seng and Acrylic Factory: what each sells in Singapore.
What we make comes from our own laser cutting, UV printing and acrylic sign pages.
Frequently asked
How big is a full sheet of acrylic in Singapore?
The full sheet at a Singapore hardware supplier is 4 ft by 8 ft (1.22 by 2.44 m), with a 4 ft by 6 ft sheet also listed. Mirror sheet at one acrylic supplier is listed smaller, at 1220 by 1830 mm. Most jobs need a fraction of a full sheet, so ask for it cut.
How heavy is a full sheet?
One supplier lists a clear 4 ft by 8 ft sheet at 9.92 kg in 3 mm and 20.55 kg in 6 mm. Weight rises with thickness, so plan the carry before you order a thick sheet.
Can I buy just a small piece of acrylic?
Yes. Some Singapore sellers take small orders in standard sizes, and some cut to the size you type in online. You can also send us a cut file and we cut the piece for you, with no full sheet to carry home.
Is frosted acrylic frosted on both sides?
It depends on the sheet. Some frosted sheet is matt on both faces, and some is matt on one side only, so say which you want. Frosted sheet suits privacy screens and sign backgrounds.
What is the film on a new acrylic sheet?
It is masking film, a thin protective layer that covers the sheet when it leaves the maker. Leave it on while you cut, and peel it off when the piece is fitted.
How thick can you laser cut acrylic?
Our laser cuts acrylic from 3 mm to 25 mm, plus mirror sheet, which is about 2 mm, and the print studio's 1.5 mm sheet for small printed pieces. A single piece can be up to about 900 by 450 mm. Past that size, or past 25 mm, ask us and we say what is possible.
Can you print a design on acrylic?
Yes. We print full colour straight onto acrylic and cut the shape along the artwork. The online UV print studio takes pieces up to A4. For anything bigger, tell us the size and we say what is possible.
Do you sell plain acrylic sheets?
We make finished pieces: cut, engraved, printed or built into a sign. Our work is finished pieces. If you only want a plain full sheet to cut yourself, ask us whether we can supply one, or try a supplier in the list above. If you want it cut to your shape, send us the file.
Does acrylic scratch easily?
More easily than glass, yes. Scratches can be sanded and polished out, so a scuffed piece is not always a lost one. Keep the masking film on until the piece is in place.








