Wall Murals & Themed Environments
Hand-painted murals, printed wall graphics and sculpted 3D features for offices, schools, retail and attractions, designed, produced and installed by one studio.
- Lead time2–3 weeks
- QuoteReply in 24h
Same-day reply. No obligation.
- Mandai Wildlife
What we make
- 01
Hand-painted murals
Feature walls, ceilings and full rooms, painted on site
- 02
Printed wall graphics
Large-format laminated panels, photo-accurate and repeatable
- 03
3D relief walls
Sculpted and 3D-printed elements with depth you can touch
- 04
Themed environments
Attractions, kindergartens, showrooms and event spaces
Selected work
A blank wall is wasted real estate. A mural turns it into the thing people remember about the space, and because we’re a fabrication studio first, ours don’t stop at paint. We combine hand-painted artwork, large-format printed graphics and sculpted 3D elements that come off the wall, literally.
Our benchmark is the Mandai Zoo Kindergarten: a structural pillar transformed into a towering rainforest tree, with a full ceiling mural and 3D-printed, fibreglass-reinforced birds flying across the canopy.
Three ways to cover a wall
Most mural companies in Singapore do one thing. We pick the right technique, or combine them, for the wall in front of us:
- Hand-painted murals. Brushwork on site by our studio artists, for feature walls, ceilings and full rooms where you want something made by hand, not printed.
- Printed wall graphics. Large-format, laminated panels that go up fast and reproduce photography, brand artwork or fine detail exactly. Best when coverage is large or the design repeats.
- 3D relief walls. Sculpted and 3D-printed elements that lift off the surface for depth you can actually touch. This is the part a paint-only studio can’t do, and it’s where a fabrication shop earns its keep.
Built for the space, and for Singapore
Every wall mural is quoted after a site survey, because the wall decides the job: its size, its surface, the light, and whether it lives indoors or out. Interior work gets a scrubbable clear coat that survives cleaning and small hands; exterior and semi-outdoor walls get UV-stable, weather-rated finishes made for Singapore’s sun and humidity.
We work across kindergartens and schools, offices and receptions, retail, F&B and attractions, handling walls, ceilings and pillars as complete transformations rather than a single flat panel. Site survey, concept art, production and installation are all handled by one team, and our artists work around your operating hours so the space keeps running.
A single painted or printed feature wall usually runs about 2 to 3 weeks from approved artwork; full themed environments with 3D relief typically take 3 to 5 weeks depending on fabrication.
Have a wall, a pillar, or a whole room? Send us a photo of it and we’ll tell you what’s possible.
What's included
- Hand-painted murals by studio artists
- Large-format printed wall graphics
- Sculpted 3D relief features (3D printed, fibreglass-reinforced)
- Full themed environments across walls, ceilings and pillars
- Indoor and outdoor protective finishes
- Site survey, concept art and installation included
How we make it
-
Site survey & brief
We measure the space, check surfaces and lighting, and pin down what the wall needs to do, whether brand, story, or full immersion.
-
Concept art
2–3 visual directions mocked up onto photos of your actual space. You pick one; we refine until it's approved.
-
Production
Painting, large-format printing, or 3D-printed relief elements, usually a mix, produced in our Bendemeer workshop and on site.
-
Install & detail
Our artists work on site, mounting printed panels, painting direct to wall, and blending sculpted pieces into the surface.
-
Seal & hand over
Protective clear coats matched to the location, scrubbable indoors and UV-stable outdoors, then a final walkthrough with you.
Frequently asked
How much does a wall mural cost in Singapore?
Murals are quoted per project after a site survey, since price depends on wall area, surface condition and whether the work is painted, printed or sculpted in 3D relief. A single painted or large-format printed feature wall sits at a different price point from a full themed environment with fibreglass-reinforced 3D elements. Send us a photo of the wall with rough dimensions and we return a concept direction and a price.
What's the difference between hand-painted, printed, and 3D-relief murals?
Hand-painted murals are done on site by our studio artists, best for feature walls, ceilings and full rooms where you want real brushwork. Printed wall graphics are large-format printed and laminated panels, faster and photo-accurate for repeatable coverage. 3D relief walls add sculpted and 3D-printed elements that come off the surface for depth you can touch, like the Mandai Zoo Kindergarten pillar we turned into a rainforest tree with 3D-printed birds across the ceiling.
Do you do themed wall murals for schools, retail and F&B spaces?
Yes, themed environments are a core part of what we do, covering kindergartens, offices and receptions, retail, F&B and attractions. We handle walls, ceilings and pillars as complete transformations, with finishes matched to the location (scrubbable indoors, UV-stable outdoors). For a single painted or printed feature wall, plan on roughly 2 to 3 weeks from approved artwork.
Do you handle the site visit and installation, or just the artwork?
We handle the whole job: site survey, concept art, production and installation are all included. After measuring the space we mock up 2 to 3 visual directions onto photos of your actual wall, then our artists install on site and work around your operating hours. Production runs from our workshop at 994 Bendemeer Road, and murals with 3D relief elements typically take 3 to 5 weeks depending on fabrication.