3D Printers in Singapore

Bambu Lab 3D printer prices in Singapore

Every machine we sell, side by side: the printer on its own, and with Bambu’s Automatic Material System (AMS) for multi-colour printing.

Prices are before GST, and 9% is added at checkout. The A series comes with the AMS lite, the P1S with the AMS, and the rest with the AMS 2 Pro. The H2 series also comes as a laser combo: the H2S with a 10W laser at S$3,799, the H2D with a 10W laser at S$4,599 or a 40W at S$5,299, and the H2C with a 10W laser at S$5,099 or a 40W at S$5,999.

Which 3D printer should you buy?

If you’re printing your first models, toys or brackets at home, start with the A1 mini. It’s the most compact machine we sell, quiet enough for a bedroom desk at under 48 dB in Silent Mode, and it calibrates itself so there’s no bed levelling to get wrong. Add an AMS lite later for up to 4-colour printing.

Want a bigger plate without paying for an enclosure? The A1 is the full-size version of the same idea: an open frame with a 256 × 256 × 256 mm build volume, full-auto calibration and a 1-click quick-swap nozzle. It’s the easiest machine on this page to understand, because nothing sits behind glass.

Printing large props, cosplay parts or planters that won’t fit an A1? The A2L has the biggest bed here with no enclosure, at 330 × 320 × 325 mm, and its toolhead can swap for a cutting or drawing module. Its bed stops at 80°C, so it’s a PLA, PETG and TPU machine, not one for ABS or nylon.

Need to print ABS, ASA or other high-temperature filament reliably? Step up to an enclosed CoreXY machine. The P1S is the cheapest reliable route into high-temperature printing we sell, setting up in about 15 minutes and handling up to 16-colour prints with an AMS. The P2S goes further: it ships with a hardened nozzle and extruder gears from the factory, so glow, wood and carbon-fibre PLAs print from day one, and PC and nylon are on its list too.

For genuine dual-nozzle work at the value end, the X2D feeds its second extruder through a tube rather than riding it on the toolhead, and it pairs a 120°C bed with a 65°C heated chamber.

The H2 series covers the biggest and most demanding jobs. The H2S has the largest single-nozzle build volume we carry, at 340 × 320 × 340 mm, for oversized parts. The H2D is our flagship: true dual-nozzle printing with an actively heated chamber, and an optional laser and cutting module turns it into an engraver too. The H2C is built for production runs, swapping between six hotends by itself mid-print, with a seventh you fit by hand, so multi-material jobs finish with minimal purge waste.

Why buy from a studio that prints every day

We don’t just sell these machines. Bambu Lab printers run our own production, and the H2D does most of the work in our shop, so the advice you get comes from the people printing on them all day.

• Collect it, or have it delivered. Pick your printer up free from our studio at 994 Bendemeer Road, or choose delivery and we’ll arrange it with you after you order.
• Everything it uses, on one site. Bambu Lab filament, build plates, hotends and AMS units, each page showing what’s in stock.
• Try before you buy. Rent a printer for 5 days or more and see if you’ll really use it.
• Learn to use it. Our 3D printing workshops take you from first file to finished print.

Only need a few parts printed?

A printer is worth it when you’re printing every week. For a handful of parts, it’s cheaper to send us the file: our instant quote prices it in seconds, in more materials than a home printer handles. See how our 3D printing service works.