Additive Inn
Get instant quote

What kind of name tag should staff wear, and how should it be fixed?

Staff name tags and badges in Singapore: engraved metal, UV printed acrylic, two-layer plastic or 3D printed, and how a pin, magnet or clip holds them.

By Terry Tan
On this page

What would your name tag look like?

Type a name and a title. The tag is drawn the way we would make it, with its size in mm.

Back

Checking

Drawing your tag.

Size

-

Capital letters

-

Acrylic

-

What is it made of?

Colour

Other colours: ask us.

Acrylic
Ink

How is it worn?

Two-layer engraved plastic is not a sheet we list, and brass is not on our engraving list. Ask us about either. A 3D printed badge with a magnet inside is a different job, described further down.

A logo you choose stays on your device: it is drawn in this page and not uploaded. This is a drawing to show the look. The 2.8 mm limit for engraved letters is Gravotech's, a maker of engraving machines. Where the type "gets small" is our own rule of thumb. A person checks every file and sends a proof before anything is made.

A staff name tag is a small plate with a name, and often a title, worn on the chest. You choose two things: what it is made of, and how it stays on. This page sets out each kind, which ones we make, and what to send for a batch.

Name tag kinds at a glance

KindHow the name is madeDo we make it?
Engraved metalThe laser engraves anodised aluminium, or coated or stainless steelYes. Ask us about the tag shape and the back
UV printed acrylicFull-colour ink on white, clear or black acrylic, cut to sizeYes, priced in our print studio. Pin or magnet backs: ask us
Two-layer engraved plasticThe top layer is removed to show a second colourNot a sheet we list: ask us
3D printedA raised name in a second colour of plasticYes. A magnet can be sealed inside

Tell us the kind you want and how many

Engraved metal: one tone, the metal itself

Gravotech, a maker of engraving machines, lists metals such as aluminium or brass among the common materials for engraved name badges. We engrave anodised aluminium, and coated and stainless steel. On a coated plate the laser burns through the coating to the bright metal underneath, so the name shows as metal on colour.

Before you order:

  • Engraving is one tone. It shows the metal, not a colour, so a logo in its own colours needs UV printing instead.
  • Brushed and polished metal shows fingerprints.
  • Brass is not on our engraving list. Ask us.
  • A tag needs a back to wear it. Tell us if you want a pin or a magnet.

Ask for engraved metal tags

UV printed acrylic: for a logo in colour

UV printing hardens the ink with ultraviolet light as it lands, so full colour goes straight onto the acrylic. Pick white, clear or black acrylic at 1.5, 3, 5 or 10 mm, cut square or with rounded corners, or cut round your artwork’s outline.

What it cannot do:

  • The studio prices one design with a count of pieces. For a different name on every tag, send us the list.
  • Its fixing choices are removable tape, screw holes and standoffs. None of them is a pin or a magnet, so ask us if the tag is to be worn.

Price a printed acrylic tag

Two-layer plastic: the classic engraved tag

Two-layer plastic is a sheet with a top layer and a contrasting core. Gravotech says the laser or tool removes the top layer to reveal a contrasting colour beneath, and recommends two-layer plastics for good reading contrast.

We do not list this sheet. For a similar two-tone look, our laser frosts black acrylic, so the mark reads soft white on black. If you need the classic sheet, ask us and we say whether we can source it.

Ask about two-colour engraved tags

3D printed: any shape, a magnet inside

Arcade Studio wanted team badges shaped like a game controller. We modelled the outline from one reference image they sent and printed 10 badges in silver grey plastic with a black edge and lettering. Seven were blank and three carried a name and title.

Partway through the print, a magnet was placed in a round pocket in each badge and printed over. The badge is held on clothing by that hidden magnet, with no pin. Our guide to embedding things in 3D prints explains the method.

A blank silver grey controller-shaped badge on a wooden table, its printed lines visible on the face and a black edge round the rim
A blank badge up close: the printed lines show on the face, and the black edge is part of the print. See the project

Trade-offs:

  • The name is raised plastic, and the printed lines show on the face.
  • Colour comes from the filament, so a fine multi-colour logo suits UV printing better.

Describe the badge you want printed

Pin, clip or magnet

Gravotech lists the usual fastenings for an engraved name badge:

  • Magnetic: no hole in the clothing, and made in two sizes to suit the badge weight and the thickness of the fabric.
  • Safety pin: the classic fastener, an economical choice for a light badge.
  • Pin with clutch: a standard fastener for a small or light badge.
  • Clutch bar: two pins on one bar, which steadies a long badge.

A magnet leaves the shirt unpierced, but it is not the right fastening for everyone. Medtronic, a maker of pacemakers, says items such as a magnetic name tag should be kept at least 15 cm (6 in) away from a heart device. Ask your staff, and give anyone who has one a pin or a clip. What is safe for a person is a question for their doctor.

A silver grey controller-shaped badge worn on a grey polo shirt beside a blue lanyard, held on by its hidden magnet
A badge worn on a shirt, held by its magnet. See the project

Tell us which fastening each person needs

Common sizes

SizeWhere it is listed
3 by 1 inch, about 76 by 25 mmA silver metal rectangle name tag from the maker Cawley
75 by 30 mmAn acrylic name tag with a magnet, from a Singapore stationery shop

Two rules of thumb from Gravotech: about 1.6 mm (1/16 inch) thick for most professional badges, so they do not bend, and never engrave letters under about 2.8 mm (0.11 inch) tall. Tell us the size you need and we confirm what we can make.

What to send for a batch

  • The list: a spreadsheet with one row per person. Name, title and any second line, spelled and capitalised as you want it printed.
  • The logo: a vector file (SVG or PDF), or a PNG at 300 dpi at the printed size.
  • The fixing: pin, clip or magnet, and who needs which.
  • The count and any size: or a photo of the tag you wear now.

We lay out every tag and send a proof. For Goldwind Services, who sent spreadsheets of label text, the client checked each line on the proof before anything was printed. Collect from our Bendemeer studio or have the tags delivered.

Send your list of names

Where these facts come from

What Additive Inn makes is from our own pages and projects, including the controller badges for Arcade Studio. Everything about the world was read on 19 November 2026.

Frequently asked

Is a name tag the same as a name badge?

In everyday use, yes. Wikipedia defines it as follows: "A name tag or name badge is a badge or sticker worn on the outermost clothing as a means of displaying the wearer's name for others to view." We use both words.

Can a name tag carry our logo in colour?

Yes, by UV printing on acrylic. Engraving is one tone only, so an engraved metal tag shows the logo in the colour of the metal.

Can a new hire be added to an earlier order?

Yes. Send the new name and title with the number of your first order. When Applied Materials came back for more plates, we kept the first set's sizes and lettering so the new ones matched.

Can someone with a heart device wear a magnetic name tag?

Medtronic, a maker of pacemakers, says items such as a magnetic name tag should be kept at least 15 cm (6 in) away from the device. For staff who have one, offer a pin or a clip instead, and leave the medical question to their doctor.

How thin can a name tag be?

Gravotech, which makes engraving machines, recommends about 1.6 mm (1/16 inch) for most professional badges so they do not bend. Our print studio's thinnest acrylic is 1.5 mm.

Chat with us