What kinds of acrylic stand are there, and which one do you need?
Acrylic stands by name: L-stands, menu holders, block stands, logo stands and standees, with their sizes, their thickness and which ones we make.
What would my character look like as an acrylic standee?
Drop in your character or logo. You see it printed in full colour, cut round its outline and standing in a base, with its height in mm.
Choose or drop your picture
PNG with a see-through background, or JPG
Drawing the sample…
The height is the whole flat piece, tab included. We print and cut up to A4. Larger, ask us.
Height
-
Width
-
Cut
-
Acrylic
-
Your picture never leaves your device: the outline is worked out in this page and nothing is uploaded. The thin orange line is where the laser cuts. The tab and base are drawn plain to show the idea, so ask us about the base. A proof comes first, and a person checks every file before it prints.
An acrylic stand is a clear or printed acrylic piece that holds something up: a sign, a menu, a photo, a logo or a cut-out character. Plain holders in standard sizes are catalogue stock at suppliers such as the two named below, so buy those ready-made. Come to us when the stand carries your artwork or needs a shape no catalogue lists.
Acrylic stands at a glance
| Stand | What it does | Sizes you meet | Our advice |
|---|---|---|---|
| L-stand (slanted sign holder) | Leans a printed sheet back so it reads from a counter | A4, A5, DL | Buy it ready-made |
| Menu or brochure holder | Holds folded menus or leaflets upright | A4, A5, A6, DL | Buy it ready-made |
| Block stand | Two clear blocks pinch a printed sheet between them | A7 to A4 | Buy it ready-made |
| Logo or award stand | A thick clear piece fitted into a base | Made to your artwork | We make it |
| Character standee | A flat cut-out in full colour, slotted into a base | Printed piece up to A4 | We make the piece, ask about the base |
| Sign on a freestanding base | A printed panel that stands on its own foot | Ask us | We make it, ask about the base |
| Phone, tablet or product riser | Props up a device or lifts a product | Any | Not listed, ask us |
Acrylic here means polymethyl methacrylate (PMMA), the clear plastic sold under names such as Plexiglas and Perspex. Our acrylic sheet guide covers the sheet itself.
Sizes: A4, A5 and DL
Stands are named for the paper they hold. A4 is 210 × 297 mm, A5 is 148 × 210 mm, and DL is 110 × 220 mm, a third of A4. Pick the holder by the sheet you will slide in, then check its outer size against the space on your counter.
L-stands and sign holders
An L-stand is shaped like an L from the side: a slightly tilted back and a foot, so a printed sheet reads from a counter. One German display maker sells its clear acrylic L-stands for product and price information, in sizes from A3 to A9 and DL. Its slanted holders for A4, A5 or A6 inserts use 2 mm clear acrylic.
- Pick it when the message changes often: you swap the paper, not the stand.
- Limit: the sign is only a sheet of paper, so it looks as tidy as the paper does.
For a message that stays put, print it on the acrylic itself: see the printed option below.
Menu and brochure holders
These hold folded paper upright: a three-sided holder for a table menu, a pocket for a leaflet. The DL pocket is the one to know, because DL is a third of A4 and takes a leaflet folded in three. The same German maker’s three-sided holder is 2 mm clear acrylic for A4, A5 and A6 inserts.
- Pick it for a menu or a leaflet you hand out.
- Limit: a holder like this is not on our list. Buying one off the shelf is simplest: ask us if you want your logo on it.
Block stands
A block stand is two thick clear panels with a printed sheet held between them. One UK supplier’s block holder has two 3 mm panels on a 1 cm base. Its magnetic photo blocks use two 10 mm panels from A7 to A5 and two 15 mm panels at A4, with magnets fitted.
- Pick it for a countertop or a shelf, where the sheet should look framed and be seen from both sides.
- Limit: the magnets hold the two panels together, so the sheet between them must be thin. That supplier says 550 micron at most, about half a millimetre.
Photos work well in blocks and frames: see our guide to the acrylic photo frame.
Logo and award stands
A logo stand is one thick clear piece, cut to your shape and fitted into a base. Lazada’s gala awards are the example: a clear acrylic heart, 15 mm thick, set in a clear base 60 mm deep, with each winner’s name printed on it. We made 40.

- Pick it for an award, a counter logo or a shelf piece that has to look like glass.
- Limit: thick acrylic takes longer to cut and costs more. Our online studio takes up to 10 mm; for thicker, like this 15 mm heart, ask us.
Character standees
A standee is a self-standing cut-out figure, often life-size and made of foam board. The acrylic version is desk size: the picture is printed on thin acrylic, cut round the outline, and slotted into a small base.
We printed one for a wedding: the couple’s photo in full colour on clear acrylic, cut to their outline, 200 mm tall. A clear tab at the foot slots into a black 3D printed base.

- Pick it for a character, a mascot or a photo that should stand out of a flat frame.
- Limit: the base has to be sized to the height of the piece, and its slot to the thickness of the acrylic, so a standee is not a flat-pack item.
For a PNG with a see-through background, our studio traces the shape from the file. A JPG is cut as a rectangle.
Printed on the acrylic, or plain
A printed stand carries the message for good. Our UV print studio cuts and prints white, clear or black acrylic in 1.5, 3, 5 or 10 mm, from 5 mm a side up to A4. On clear acrylic we can print on the back, so the picture is read through the sheet. It looks glossy, with depth, like a print under glass. A proof comes first, and a person checks every file before it prints.
A plain stand is the right pick when the message changes. A printed one is right when it does not.
When a 3D printed stand is better
Some stands are a shape, not a picture: lettering that rises from one base. The NCT logo stand below was 3D printed in coloured plastic, not acrylic, its tall letters rising from one long base.

Choose plastic for chunky letters and one-piece shapes. Choose acrylic when you want it clear, or a flat picture in full colour.
Where these facts come from
Every outside fact was read on the page named below on 19 November 2026. Sizes, thicknesses and magnet limits are one maker’s and one supplier’s, not a standard, so check the listing for the stand you buy.
- Wikipedia, ISO 216 and Envelope: the A4 and A5 sheet sizes, and DL as 110 × 220 mm and a third of A4.
- Wikipedia, Standee and Poly(methyl methacrylate): what a standee is, usually foam board and often life-size, and that acrylic is PMMA sold under brand names.
- VKF Renzel, slanted sign holder “Taxus”, 3-sided menu holder and acrylic L-stands: 2 mm clear acrylic, A4, A5 and A6 inserts, and DL as a third of A4.
- UKPOS, magnetic clear acrylic block sign holder and magnetic photo block: panel thicknesses, base, magnets and the 550 micron limit.
- First-party facts (the studio’s sizes, thicknesses, back printing, lead time and file rules, the Lazada and wedding pieces) are from our own studio and project pages, listed in the facts file for this post.
Frequently asked
What size is an A4 acrylic stand?
It is made for a sheet 210 by 297 mm, so the stand itself is a little larger than that. Check the maker's listed outer size against your counter before you buy, because the frame, the lip and the foot all add to it.
What is a DL acrylic holder?
DL is 110 by 220 mm, one third of A4. It is the size of a leaflet folded in three, so a DL holder is the one for tri-fold menus and brochures.
How thick should an acrylic stand be?
It depends on the kind. Paper holders are thin sheet, around 2 mm in one maker's range. In one UK supplier's range, block stands run from 3 mm panels on a thick base to 10 or 15 mm blocks. A standee is thin, and its base slot is cut to match, so we settle the thickness with the base.
Do you make acrylic stands for phones or tablets?
Not as a listed product. If you want one in a particular shape or with your logo on it, send us a sketch and we say whether it can be made.
Can you print a photo or character onto an acrylic standee?
Yes for the flat piece: we print it in full colour and cut it to the outline of your artwork. Send a PNG with a see-through background and the shape is traced from it. A JPG is cut as a rectangle.
What is the difference between a standee and a stand?
A stand holds something else up, such as a sign or a menu. A standee is the thing itself: a flat cut-out of a figure or logo that stands on a small base.
How big can a printed acrylic piece be?
The studio takes pieces from 5 mm a side up to A4. Larger pieces are possible: ask us. For a stand with a base or a slot, ask us and send the height you have in mind.
How long does a printed acrylic piece take?
A proof comes first, and the piece is ready 5 to 7 working days after you approve it. A stand with a base is not covered by that, so ask us for a date.








