Additive Inn
Get instant quote

Rose Gold Acrylic Logo Sign

Client · Move with Myow (Rob Davidson)

  • ServiceCustom Acrylic Signage
  • Materials5 mm acrylic, laser cut as separate pieces, High-bond mounting tape
  • FinishesPrimer, then rose gold spray paint (sample B of three)
  • CompletedSept 2026
Start a similar project
The Move with Myow logo and the words MOVE WITH MYOW in rose gold acrylic letters on a white wall above green plants
The rose gold Move with Myow sign seen at an angle, each letter standing slightly off the white wall
Each letter is its own piece, fixed straight to the wall with no backing board.

This is a rose gold wall sign for Move with Myow, ordered by Rob Davidson. The logo mark and the words MOVE WITH MYOW are laser cut from 5 mm acrylic, painted rose gold and fixed straight onto a white wall above a wall of plants. The sign is 790.8 mm wide and 300 mm high.

The brief

Rob sent us the logo and the size of the wall space, 1950 mm by 450 mm. He wanted the logo about 300 mm tall in rose gold, cut as separate letters with no board behind them, and fitted on site.

How we made it

We scaled the logo to fit the wall, with the logo mark 189.9 mm high and the lettering 53.8 mm high, and drew it with every size marked. Rose gold paints vary a lot, so we sprayed three samples first. Rob chose sample B, which keeps its colour best against a white wall. The first design was approved as drawn, four days after the scope was signed off.

Each piece was laser cut from 5 mm acrylic, primed, then sprayed rose gold. The whole sign was laid out on a table in our studio before it went to site.

Installing it

On 22 September 2026 we taped a cardboard template of the sign to the wall to set its position, then fixed each piece in place with high-bond tape. No screws go through the wall. From design approval to a finished sign on the wall took eight days.

See the signs we make

More work

Chat with us