UV printed acrylic dry-erase boards for Swappo
Two sample dry-erase boards for Hederlig's Swappo letter game: 3 mm acrylic laser cut to A5 and A6, with rounded corners and a hole for a marker clip, then UV printed.
- Client
- Hederlig
- Service
- UV Printing
- Also used
- Laser cutting & stickers
- What it is
- Sample dry-erase boards for a letter game, A5 and A6
- Started from
- The client's print-ready files and cut lines
- Material
- 3 mm acrylic
- Sample boards, A5 and A6
- 2
- Acrylic, cut and printed
- 3 mm
What we brought
What we can do
Cut to the client's lines
Each board was laser cut from 3 mm acrylic to its size, with rounded corners and a round hole for a marker clip.
How we look after you
Printed on the board
The artwork was UV printed straight onto the acrylic: a black border, the Swappo logo and white panels to write on.
What you get
Samples before a run
One board in each size, so the client could check the print, the feel and the fit of the marker clip before ordering more.
Gallery
The whole project at a glance. Drag or swipe to browse; tap a picture to enlarge it.
1 / 9
-
The finished piece
-
The A5 and the A6, side by side.
-
The logo on the border.
-
The A5 board, front on.
-
The letter panels.
-
Around the two boards.
-
Across the A5 board.
-
Laser cuttingThe rounded corner and the clip hole.
-
UV printingThe letters, printed on the acrylic.
The build
How we built it
4 steps, from the brief to the finished piece. Pick a step to jump to it.
The brief
Step 1 of 4 · 05/11/2026
- Sizes
- A5 (210 x 148 mm) and A6 (148 x 105 mm)
- Material
- 3 mm acrylic
- Quantity
- One sample of each size
At Additive Inn, our 3D printing studio in Singapore, we made sample dry-erase boards for Hederlig's Swappo letter game: one A5 board (210 by 148 mm) and one A6 board (148 by 105 mm), both landscape, in 3 mm acrylic. The client supplied print-ready files with a 3 mm bleed and the cut lines for each size.
Laser cutting
Step 2 of 4 · 11/11/2026
Each board was laser cut from 3 mm acrylic to the client's cut lines: rounded corners (6 mm on the A5, 5 mm on the A6) and a round hole near the top corner for a marker clip.
UV printing
Step 3 of 4 · 12/11/2026
The artwork was then UV printed onto the acrylic from the client's files: the black border with the Swappo logo, the white panels to write on, the letters and a QR code. Both boards were checked before they left.
The final build
Step 4 of 4 · 13/11/2026
Two finished sample boards, one A5 and one A6, ready for the client to write on and try the marker clip.
The details
More production runs
See all production runs →-
Osteria Mozza (OUE) Laser-engraved serving boards for Osteria Mozza Osteria Mozza's logo, laser-engraved on 90 wooden serving boards for OUE's restaurant at ION Orchard, after eleven test settings on a spare board. -
S-Cool Services Reverse-engineered vent parts for S-Cool Services Four vent parts rebuilt in CAD from S-Cool Services' own samples, one redesigned with straight slats, then 3D printed in PLA in white and black.