Additive Inn
Get instant quote

Which plywood do you need, and where do you buy it in Singapore?

Plywood types sold in Singapore: commercial, marine, birch, WBP, film-faced and laminated, with sheet sizes, grades, shops and what laser cuts cleanly.

By Terry Tan
On this page

How many pieces from one plywood sheet?

Enter your piece size and quantity. The tool lays them out on a standard sheet.

Layout is a simple grid with 5 mm between pieces; a cutter may fit a few more.

Plywood is thin sheets of wood glued in layers, each layer usually turned a right angle to the one beneath it. In Singapore it is sold as commercial, marine, birch, weather and boil proof (WBP), film-faced and laminated sheets, most of them 1220 x 2440 mm. For laser-cut models and kits, laser guides point to birch.

Plywood types at a glance

TypeWhat it isGood forOn a laser cutter
Commercial plywoodThe everyday sheet, also called ordinary plywoodCabinets, wall panelling, flooringTest a sample first: layers and glue vary
Marine plywoodMade to BS 1088: durable veneers, a tested glue bond, no open gaps in the coreBoats, bathrooms, outdoor workAsk us first: the glue can char the edge
WBP plywoodGlue made to survive weather and boiling waterOutdoor structures, covers, concrete formworkAsk us first: same glue worry as marine
Birch plywoodBirch veneers in every layer, pale and denseFurniture, models, kits, fine joineryThe usual laser pick: test a sample
Film-faced plywoodA phenolic film (a hard resin skin) on both facesConcrete formwork, trailer floorsBest avoided: phenolic resin is the kind laser makers warn against
Laminated plywoodA plastic or melamine skin on the faceCabinets, shelvesPVC skin: never cut. Other skins: ask us
  • Grades such as BB/CC describe how each face looks, not how strong the sheet is.
  • Our laser cuts plywood from 3 to 12 mm thick.

Send us a photo of your sheet and we say if it cuts

The sheet: size and thickness

The standard sheet is 1220 x 2440 mm, which is the 4 x 8 ft sheet. A Malaysian plywood maker lists that size first, then 1220 x 1830, 915 x 1830 and 915 x 2440 mm, in thicknesses from 2.7 mm to 35 mm. Birch is also sold squarer, such as 1525 x 1525 mm.

  • Plan for the lift. A Singapore hardware retailer warns that an uncut 8 x 4 ft sheet will not fit a normal Housing and Development Board (HDB) or office lift. Ask the shop to cut it down first. One timber shop lists a plywood cutting service.
  • The label is not the exact thickness. A typical sanded 3 mm birch sheet can measure 0.4 mm thin or 0.3 mm thick. Slots that must grip tightly need a test piece.

Face grades: BB/CC and what the letters mean

A grade is a letter for how a face looks. A UK timber merchant says its Malaysian sheets are normally BB/CC, with BB the better face and CC the back, because only one side is expected to show.

Birch uses its own letters:

  • B: solid veneers, no open defects and no plug repairs.
  • BB: small repaired splits and pin knots allowed. Often the paint grade.
  • CP: more repairs, open defects and colour change than BB.
  • C: the lowest grade, with open defects allowed.

Put the better face where it shows. Use the lower grade for the back and for hidden parts.

Commercial plywood: the everyday sheet

Commercial plywood, also sold as ordinary plywood, is the general-purpose sheet. One Singapore supplier lists it for wall panelling, flooring and cabinetry. Makers sell it in several glue types and grades, so two sheets with the same label can differ.

Its limits are inside the sheet:

  • The core can vary. A UK timber merchant says cheaper hardwood-faced sheet often has a softwood core, usually poplar or eucalyptus.
  • It can be uneven on a laser. A laser machine maker’s guide lists voids that flare or leave uncut bridges, and dense glue pockets that stall the beam. That is why we test a sample before a run.

Send a sample of your sheet for a test cut

Marine and WBP: for damp places

WBP means weather and boil proof. A Singapore timber shop describes WBP plywood as made to endure weather, high humidity and the occasional soaking, using melamine or phenolic resin glue. Marine plywood is made to a standard, BS 1088, which sets rules for the veneers and for the glue bond, and does not allow open gaps in the core.

Neither one is waterproof wood. Our marine plywood guide covers the BS 1088 standard, what the marking means and where it earns its place.

Birch plywood has birch veneers in every layer. A Singapore shop lists it for furniture, cabinetry and joinery, and for tooling, die boards and laser cutting. Our model parts are cut from thin plywood, but our project pages do not record its species.

Two long diamond-lattice facade screens cut from thin plywood stand on pale roof plates while a hand fits the next section into place
Diamond-lattice facade screens cut from thin plywood for a building model. See the project

It costs more than basic plywood, so ask the shop for the grade and the sheet size. Our birch plywood guide has the grades, thicknesses and finishing.

Film-faced and laminated plywood

Film-faced plywood has a smooth phenolic film on both faces so concrete does not stick to it. A Singapore listing for an 18 mm sheet says it is edge-sealed and meant for formwork, beams, walls and trailer flooring. The listing calls it reusable on site, and 18 mm is past our 12 mm limit.

Laminated plywood is plain plywood with a skin on the face. One Singapore timber shop lists skins in white PVC, solid colour PVC, woodgrain PVC and white polyester, plus melamine plywood. PVC never goes in our laser, because its fumes are dangerous. For any other skin, ask us.

Not sure what your sheet is faced with? Ask us

Where to buy plywood in Singapore

Three shops list plywood on their own websites. Stock changes, so ask each one.

  • Hong Wen Hardware Timber, 10 Admiralty Street. Lists plain plywood, WBP, marine, bending, fancy, melamine and black film formwork board, and a plywood cutting service. Its G Search listing also covers birch plywood.
  • Chi Han Trading. Lists marine, commercial, bending and exterior plywood on its timber and plywood page.
  • Hardware City. Lists marine plywood in 8 x 4 ft sheets in 9, 12, 15, 18 and 25 mm.

If you want parts cut, not a sheet bought, you can skip the shop. Ask us whether we can supply the sheet for your job.

Which plywood laser cuts cleanly

Our laser cuts plywood and MDF (medium-density fibreboard) from 3 to 12 mm. For one event we cut 320 kits from thin plywood the client supplied, in three days, each part held in its sheet by small tabs.

Rows of laser-cut thin plywood kit sheets laid out on a white table, ready for checking
Sheets from the run of 320 kits, laid out for checking. See the project

What to expect:

  • Natural wood moves. Plywood varies from board to board in flatness and thickness, and no cutting can take that out. We can cut a sample on your board first.
  • Laser guides start with birch. One calls Baltic birch the reference plywood. It also advises against phenolic and WBP exterior glues, so film-faced and similar sheet is best avoided. Plain plywood can work, with less even results.
  • PVC is never cut. That includes PVC-faced plywood.
  • We need to know what it is. We do not cut a sheet we cannot identify, so tell us the type and the facing.
A nine-floor block of flats cut open down one side to show its plywood floors and stairs, beside a green, red and grey frame with yellow platforms
The floor plates, room walls and facade panels of this model were cut from thin plywood. See the project

Send a cut file as DXF, AI, SVG or PDF. Our laser cutting file guide says how to set it up. For whole models, see our scale models page.

Tell us your plywood and your cut file

More on boards

Where these facts come from

Every outside fact was read on the page named here on 19 November 2026. Sizes, stock and listings change, so check with the seller before you buy.

Frequently asked

What is the standard size of plywood in Singapore?

Most sheets are 1220 x 2440 mm, the 4 x 8 ft sheet. Makers also list 1220 x 1830, 915 x 1830 and 915 x 2440 mm. Birch is also sold in squarer sizes, such as 1525 x 1525 mm, so check the size before you plan the cuts.

Why is plywood made in layers?

Each layer has its grain turned a right angle to the next. That makes the sheet less likely to split when nailed at the edge, swell and shrink less, and keeps its strength even in every direction.

What does WBP mean on plywood?

Weather and boil proof. It describes the glue holding the layers together, which is made to survive weather and hot water. It does not make the wood itself waterproof, so cut edges still need sealing outdoors.

Is marine plywood the same as WBP plywood?

No. Marine plywood is made to a named standard, British Standard BS 1088, which also sets limits on defects such as knots and core gaps. A WBP sheet only promises the glue. Our marine plywood guide covers the difference.

Can you cut plywood I bought from a hardware shop?

Possibly. Our laser cuts plywood from 3 to 12 mm. Send the type, the thickness and a photo of the sheet, and a person tells you whether we can cut it. We can cut a sample on your board and test it first. We do not cut plywood faced with PVC, or a sheet we cannot identify.

What plywood is best for scale models?

Thin birch plywood is a common pick, because the layers are even and the edge cuts clean. Our own plywood models were cut from thin sheet and left raw, so the wood reads as the building. Tell us the scale and ask us about thickness.

How is formaldehyde release labelled on plywood?

Makers label it by class, such as E1, E0 and Super E0. If the piece will be handled a lot, for example in a goodie bag, ask the seller which class the sheet is.

Does the grade on plywood tell me how strong it is?

No. Grades such as BB/CC describe how each face looks: knots, patches and splits. A Finnish birch maker says its surface grade does not influence the panel's mechanical properties.

Chat with us