Mirror-finish bird logo for Krungthai Bank
Krungthai Bank's bird logo in 3D: modelled from the bank's own artwork, SLA printed at 30 cm and electroplated to a mirror finish, two pieces made to hang on a wall.
- Client
- Krungthai Bank
- Service
- Custom Signage
- Made from
- The bank's own logo artwork, the bird only, no wording
- Size
- About 300 by 298 mm
- Quantity
- Two pieces
- Across the finished logo
- 30 cm
- Pieces made
- 2
What we brought
What we can do
From flat artwork to a sculpture
The bank sent its logo as a flat file. We modelled the bird in 3D, every feather and curl, and showed it from five sides before printing.
How we look after you
A mirror finish
Electroplated to a mirror finish, so the bird reads as solid polished metal while staying light enough to hang.
What you get
Ready to hang
An oval slot on the back takes a wall hook, so each logo hangs flat with no visible fixings.
Gallery
The whole project at a glance. Drag or swipe to browse; tap a picture to enlarge it.
1 / 7
-
The finished piece
-
One of the two finished logos.
-
The head and crest up close.
-
The body and wing.
-
Light moving over the finish.
-
Modelling the birdRenderThe bird from five sides.
-
DrawingThe dimension sheet, about 300 mm across.
The build
How we built it
5 steps, from the brief to the finished piece. Pick a step to jump to it.
The brief
Step 1 of 5
- Source
- The bank's logo artwork and a reference video
- Size
- About 300 by 298 mm
- Finish
- Electroplated, mirror silver
- Quantity
- Two pieces
At Additive Inn, our 3D printing studio in Singapore, we made Krungthai Bank's bird logo as a three-dimensional wall piece for its Singapore branch: two logos, 30 cm across, with a polished metal finish. The bank sent its logo artwork and a reference video for the finish, and asked for the bird only, without the wording.
Modelling the bird
Step 2 of 5
We modelled the bird in 3D from the flat artwork, then sent the bank sculpt views from the left, front, right, back and three-quarter, with a dimension sheet. An oval slot on the back takes a hook for hanging. The bank approved the design the same day.
Printing in resin
Step 3 of 5
Each bird was SLA printed in resin, which holds the fine curls of the feathers, and prepared for plating.
Electroplating
Step 4 of 5
Each bird was electroplated to a mirror-silver finish, matched to the bank's reference video.
The final build
Step 5 of 5
Two mirror-finish bird logos, each about 30 cm across, ready to hang on the wall by the slot on the back.
The finish
More signs, emblems & keychains
See all signs, emblems & keychains →-
St Luke's ElderCare Layered acrylic wall plaques for St Luke's ElderCare Two donor appreciation plaques for St Luke's ElderCare: an engraved frosted panel floating over overlapping blue, green, red and orange acrylic. -
Move with Myow Rose gold acrylic logo sign for Move with Myow A rose gold acrylic logo sign for Move with Myow, 790.8 mm across, laser cut as separate letters and taped straight onto a white wall.