Layered acrylic wall plaques for St Luke's ElderCare
Two donor appreciation plaques for St Luke's ElderCare: an engraved frosted panel floating over overlapping blue, green, red and orange acrylic.
- Client
- St Luke's ElderCare
- Service
- Custom Signage
- What they got
- Two donor plaques, each 750 by 700 mm
- What it is made of
- Engraved frosted acrylic over four tinted acrylic panels
- How it is fixed
- Four standoffs through every layer into the wall
- Donor plaques, one for each honouree
- 2
- Overall size of each plaque, from the drawing
- 750 x 700 mm
- The engraved frosted centre panel
- 450 x 300 mm
- Depth off the wall, standoffs included
- 44 mm
What we brought
What we can do
Colour that layers, not paint
Overlapping tinted acrylic mixes new shades where panels cross, with no paint to chip.
How we look after you
Drawn to size before cutting
A full drawing set every panel, the standoff fixing and the 44 mm depth off the wall.
What you get
The words stay sharp
The logo and dedication are laser engraved into the frosted centre panel, so nothing peels.
Gallery
The whole project at a glance. Drag or swipe to browse; tap a picture to enlarge it.
1 / 4
-
The finished piece
-
Design and prototyping · Revision 0DrawingPanels, standoffs and sizes on one sheet.
-
ProductionThe engraved frosted centre panel.
-
Build and assemblyThe layers standing off the wall.
The build
How we built it
5 steps, from the brief to the finished piece. Pick a step to jump to it.
The brief
Step 1 of 5
- Quantity
- Two wall plaques, one per honouree
- Centre panel
- 300 by 450 mm, translucent white
- Colours
- Panels in the colours of St Luke's logo
- Also made
- Two 120 by 30 mm title plates, gold on black acrylic
At Additive Inn, our 3D printing studio in Singapore, we made two donor plaques for St Luke's ElderCare. They needed a dedication on a translucent white centre panel, framed by coloured acrylic panels in their brand colours.
Design and prototyping
Step 2 of 5
We drew the plaque at full size: the engraved centre panel over four tinted panels, each set at its own offset, all held on 19 mm standoffs.
-
Revision 0 · 09/12/2025
The first layout, 750 by 700 mm, with the frosted centre panel over blue, green, purple and orange.
Drawing
Production
Step 3 of 5
Each plaque's panels were cut from acrylic. The St Luke's logo, the dedication and the date were laser engraved into the frosted centre panel, and every piece was cleaned up and finished.
Build and assembly
Step 4 of 5
The four tinted panels stack behind the frosted centre panel. Four standoffs pass through every layer, spacing them apart and fixing the plaque 44 mm off the wall.
The final build
Step 5 of 5
St Luke's ElderCare received both plaques, one dated 23/12/2025 and one 12/01/2026. Where the tinted panels overlap, the colours mix into new shades around the engraved centre.
More signs, emblems & keychains
See all signs, emblems & keychains →-
The Unique Prime Consultant Gold acrylic logo sign for The Unique Prime Consultant An 800 mm logo sign in sprayed gold acrylic for The Unique Prime Consultant's meeting room, colour tested on samples and installed within a week. -
Core values signage with matching stencils Six core values, each made as a set of black letters and a matching stencil plate, laid out and measured before delivery. -
Rose gold acrylic logo sign for Move with Myow A rose gold acrylic logo sign for Move with Myow, 790.8 mm across, laser cut as separate letters and taped straight onto a white wall.