Additive Inn
Get instant quote

3D printed golf alignment tool

A three-armed golf alignment frame, 3D printed in speckled dark grey, with a round centre seat and red screw feet.

Frame
Three slotted arms around a round centre seat
Feet
A red screw foot at each corner
Made for
Standing level on the turf
Start a prototype (opens WhatsApp) Send a brief

What we brought

  1. What we can do

    Parts that move, printed

    The red feet are printed screws that turn in the frame's corners to set its height.

  2. How we look after you

    An open frame

    Each arm is slotted along its length, leaving an open triangle around the centre seat.

  3. What you get

    Built for the turf

    Three knurled feet stand the frame on grass and can be turned by hand to level it.

The build

How we built it

4 steps, from the brief to the finished piece. Pick a step to jump to it.

The brief

Step 1 of 4

Frame
A triangle of three arms
Centre
A round seat where the arms meet
Feet
Three, adjustable by hand

At Additive Inn, our 3D printing studio in Singapore, we 3D printed a golf alignment tool: a three-footed frame that stands level on the turf, with a round seat in the middle.

Production

Step 2 of 4

We printed the frame in a speckled dark grey on our FDM printers, with a slot along each arm and a round seat at the centre. The feet were printed separately in red, each a threaded screw with a knurled knob.

The slotted arms and the centre seat.

Build and assembly

Step 3 of 4

A red foot screws through each corner of the frame, its thread showing above and its knurled knob below, so each corner can be raised or lowered.

Red screw feet through each corner.
A thread above, a knob below.

The final build

Step 4 of 4

The finished tool stands on three red feet on the turf, with the round seat held at the centre of the frame.

Standing on its three red feet.

More product development

See all product development →
Chat with us