What is a custom bobblehead, and can you get one made in Singapore?
A custom bobblehead has a big head on a spring. How the makers build one, what to send them, and the fixed figurine from your photos that we make.
Which route suits your bobblehead?
Two questions, and you get the route from this guide that fits.
A bobblehead is a small figure with an oversized head on a spring, so the head nods when you tap it. A custom one is sculpted from your photos by a maker who builds the spring in. We do not list a spring-neck bobblehead. We make a fixed figurine from your photos instead, and the table shows how the routes compare.
Bobblehead routes compared
| Route | Does the head nod? | How it is made | Good for |
|---|---|---|---|
| Bobblehead maker, polymer clay | Yes, on a spring | Sculpted by hand from pre-coloured clay, then baked | One figure, or a tight deadline |
| Bobblehead maker, polyresin | Yes, on a spring | Sculpted, moulded, cast in resin and painted by hand | Several copies, a harder figure |
| Mini Me Colour Print (ours) | No, the head is fixed | Printed in four colours on a filament printer | A cheerful big-head gift, ready in about a week |
| Mini Me hand-painted (ours) | No, the head is fixed | Printed in resin, painted by hand, set on a base | A keepsake that sits under a glass dome |
| Mini Me Paint your own (ours) | No, the head is fixed | A blank white print, with paints and brushes | A gift to paint together |
The maker rows come from one bobblehead maker’s own pages. Other makers may work differently.
What a bobblehead is
It is a small collectible figurine whose head is often oversized. Instead of a solid join, a spring or hook holds the head to the body, so a light tap makes it bobble. That is the whole trick.
The idea is old. Figures of Buddha and other religious figures, called temple nodders, were made in Asia in the 17th century. Baseball took them up. By 1960 Major League Baseball had produced a papier-mâché bobblehead for each team, and in 1999 the San Francisco Giants became the first Major League team to hand them out, 35,000 Willie Mays ones at one game. Made-to-order, personalised bobbleheads from online vendors became a market in the 2000s, typically 15–18 cm tall.
How custom bobbleheads are made
A custom bobblehead maker takes your photos, sculpts a figure, and joins a big head to the body on a spring. One maker says there are two ways to build the figure.
- Polymer clay. The figure is sculpted from clay that is already coloured, then baked once you approve it. There is no mould, so it is generally cheaper and quicker to proof, but identical duplicates are not possible: each one is handmade and varies a little.
- Polyresin. A mould is made from the sculpt and the parts are cast in resin, then painted by hand. The figure is harder and more durable than clay, a copy is possible, and a colour can still be changed because paint, not coloured clay, makes the colour.
One maker’s build page asks for the highest-quality photos you have of the head, then of the body, plus the pose, any hat or handheld item, and a base. It also warns that the mould is recycled after the order ships, so ask for extra copies at the start.
We do not make this kind of figure, so we cannot promise one. If you want a head on a spring, ask us what is possible before you pay for anything.
A fixed figurine from your photos: Mini Me
This is what we make. A Mini Me is a figurine of you, your couple or your pet, on a customised base. The face is simplified, and the head does not move.
You upload two or three clear photos per person, a front view and a side view in even light. For a pet, one full-body photo and one clear face photo is enough. Your photos become character artwork first. You can ask for two rounds of changes to hair, outfit, colours and pose, then check a 3D preview. Nothing is printed until you approve both.
Four styles are on offer, each by how it is made:
- Colour Print: four colours, machine-printed, chunky and big-headed.
- Animated: stylised and hand-painted.
- Realistic: the closest likeness, hand-painted.
- Paint your own: a blank print with twelve paints and two brushes, chunky and big-headed like the Colour Print.
Colour Print and Paint your own come up to 10, 15 or 20 cm tall. The hand-painted styles start at 15 cm and both sit under a glass dome. Every one comes with a base sculpted to suit the piece.

The honest limits:
- It is not a bobblehead. The head is fixed to the body.
- It is a stylised portrait, not a 3D scan. The likeness lives in the hairstyle, glasses and outfit, not in every feature of the face.
- Thin parts are simplified. Spectacle frames and loose hair are reinforced so they survive handling.
- Changes after printing are not possible, which is why you approve the artwork and the preview first.

When the likeness has to be close
Some gifts need a face people recognise at once. For those, we quote a bespoke piece instead of a Mini Me. The couple below was sculpted from one photo and printed in white, with the man’s open glasses frame and the woman’s tied-back hair kept, and fingers, glasses and hair edges reinforced so they would not snap.


A bespoke piece is quoted per piece, so send the photos and the date you need it. If you want a figure with moving arms and legs instead, read our guide to action figures.
A bobblehead as a gift
A figure of the person works best when the person is the point: a couple at their wedding, a colleague leaving after nine years, a graduate, a pet the whole family dotes on. It is a keepsake that stays on a desk or shelf.
Plan the date. A Colour Print or Paint your own takes about a week, and a hand-painted one about four weeks after you approve the preview, plus the days you take on the artwork rounds. You can send it straight to the person you are giving it to, with a gift box and a note. For a team mascot or a run of identical figures, our figurine service takes the brief. More gift ideas are in our birthday gift guide.
Where these facts come from
Every outside detail was read on the source’s own page on 19/11/2026. Another maker may work differently, so check any bobblehead maker’s page before you order.
- Wikipedia, Bobblehead: the definition, the spring or hook, the history and the typical height of made-to-order ones.
- Bobbleheads.com, Polymer Clay vs Polyresin Custom Bobbleheads and How to Build a Bobblehead: how one maker builds each kind, and what it asks you to send.
- What we make, how long it takes and what comes with it is from our own pages: the Mini Me page and the monk, couple and character figure projects.
Frequently asked
What is a bobblehead?
A small figurine with an oversized head joined to the body by a spring or hook, so a light tap sets the head nodding. The nickname list includes nodder, wobbler and nodding dog.
Do you make bobbleheads with a spring head?
No, we do not list a spring-neck bobblehead. What we make is a Mini Me: a fixed figurine from your photos with a simplified face. If a nodding head matters, tell us what you have in mind before you order anything.
How tall is a custom bobblehead?
Personalised ones from online makers are typically 15 to 18 cm tall, according to Wikipedia. A Mini Me comes up to 10, 15 or 20 cm, but the hand-painted styles start at 15 cm, and a hand-painted scene of three or more people starts at 20 cm.
Who invented the bobblehead?
Wikipedia names no single inventor. Nodding religious figures called temple nodders were made in Asia in the 17th century, and the earliest known Western reference is thought to be an 1842 short story by Nikolai Gogol. Baseball giveaways helped bring them back from the late 1990s.
Can a bobblehead be made from a photo?
Yes, bobblehead makers ask for the best photos you have of the head and body, plus the pose and any hat or handheld item. For a Mini Me, send two or three clear photos per person, and one full-body and one face photo for a pet.
Can I order several copies of the same figure?
It depends on the method. One bobblehead maker says a polymer clay figure cannot be duplicated and polyresin is the better route for copies, because it comes from a mould. In the Mini Me Studio you can order several copies of the same figurine.
How far ahead should I order a figurine for a gift?
Give a hand-painted Mini Me about five weeks: about four are ours after you approve the 3D preview, and the rest is the artwork rounds, which move at your pace. A Colour Print or Paint your own takes about a week. Tell us your date if it is tighter.
Can a pet be a figurine too?
Yes, with the same process and the same base. Send one full-body photo and one clear face photo of the cat, dog, bird or rabbit.
Will the figurine look exactly like the person?
It will be recognisably them in a deliberately stylised form. Hairstyle, glasses and outfit are kept and the face is simplified. If you want a true portrait sculpt, talk to us and we quote it as a bespoke piece.








