Can you get a custom action figure made of a real person?
An action figure has moving joints. Collector scales by height, what a custom figure of a person takes, and what we make: fixed-pose figures.
How tall would a figure of you be?
Enter a height and see the figure at the usual collector scales.
1:50 means the model is 50 times smaller than the real thing. Bars share one scale so you can compare.
Yes, but what we make of a person is a figurine, not an action figure. An action figure is poseable, with joints that move. Ours is printed in one fixed pose from your photos, then painted by hand. If you want joints, ask us first.
Action figure scales at a glance
| Scale | Figure height | Lines made at this scale |
|---|---|---|
| 1:18 | 3.75 inches (95 mm) | Kenner Star Wars, Hasbro G.I. Joe: A Real American Hero |
| 1:12 | 6 inches (152 mm) | Marvel Legends, Hasbro’s Marvel Cinematic Universe figures |
| 1:10 | 7 inches (178 mm) | Mattel’s He-Man “classic scale”, most NECA figures |
| 1:6 | 12 inches (305 mm) | Hasbro’s “classic scale” G.I. Joe, Hot Toys Movie Masterpiece Series |
At 1:12, one inch of figure stands for one foot of person. A 6-inch figure therefore stands for a person 6 feet tall. The 1:6 scale is also used for static display figures, which do not move.
What makes it an action figure
An action figure is a poseable character figure, usually plastic. Hasbro coined the term in 1964 to sell G.I. Joe. The moving parts are called points of articulation, or joints.
The basic set is one neck joint, two shoulder joints and two hip joints. Beyond those, rotating wrists, bending knees and a swivelling waist are common. A ball joint often lets a head tilt as well as turn.
Ours has none of that. Each figure is fixed in one pose, and nothing on it moves.
A static figure of a real person
This is what we make. You send two or three clear photos per person, front and side, in even light. We turn them into stylised character artwork, then a 3D preview you spin and approve. Nothing prints until both are approved.
The hand-painted figure is printed in resin and painted by hand, on a base. A colour print skips the paint. Hand-painted sizes go up to 15 or 20 cm. Faces are simplified rather than photo-real, which keeps the piece warm.
The couple below was sculpted from one photo and printed in plain white. Their glasses, fingers and hair edges were reinforced so they would not snap.

The limits are plain:
- One pose. It cannot be bent into another.
- Fixed to a base. The base holds it upright.
- Stylised. It is a likeness in a character style, not a copy of a face.
A dramatic pose is still one pose
An action pose is not a joint. Our Captain America is caught mid-throw: fist up, shield swept out, standing on broken concrete and rebar. It looks ready to move, and it does not.
It was printed in resin, primed and painted by hand in comic-book colour, with a weathered base. That is the kind of piece we make: a character, a pose and a scene, in one print. Captain America is someone else’s character. We made this one for Colorverse. If you bring a character from a film or comic, you need the right to use it.

Posable pieces: ask us first
We do not list a jointed figure, and none of our project pages shows one. We will not guess at what it takes. A person will tell you plainly whether we can do yours.
Send these four things:
- Photos, or a drawing of the character.
- The height you want, in millimetres or inches.
- The joints you want. The basic list above is enough to name them.
- How many figures you need.
If the answer is no, you will hear that before anything is made.
What a custom figure of a person takes
The steps for a Mini Me, in order:
- Photos. Two or three per person, front and side.
- Artwork. Two rounds of changes are included: hair, glasses, outfit, colours and pose.
- 3D preview. You turn it round and approve it.
- Print. Resin for the hand-painted styles, or a colour print on a filament printer.
- Paint and base. In the painted styles: primed, painted by hand and mounted.
A hand-painted figure takes about four weeks from your 3D preview approval, and a colour-printed one about a week. The artwork and preview rounds come first and move at your pace.
Mascots and batches
A brand character is a figure too. For Anteriad we modelled two collectible figures in 3D from concept art, printed them in colour and boxed them. The run was 40 figures, each about 120 mm tall in its own window box.
Colour comes from the filament, with no paint. For 20 or more identical figures we can also cast from a silicone master.

Choosing the height
Divide the real height by the scale. A 1.8 m person at 1:12 comes out at 15 cm. At 1:6 it is 30 cm.
Our hand-painted figures are priced up to 15 or 20 cm. So 1:12 fits, and 1:6 does not unless you ask for a bespoke size. A 20 cm figure for a 1.8 m person works out near 1:9.
Stylised proportions bend the maths. A head drawn bigger than life makes the height a size, not a true scale. Judge the figure on the 3D preview, not on the ratio.
Where these facts come from
Outside facts were read on 19 November 2026. What Additive Inn makes is from our own project and service pages.
- Wikipedia, Action figure: the definition, Hasbro’s 1964 term, its table of scales, heights and example lines (the ranges listed are Wikipedia’s), 1:6 static display figures, and the basic joints.
- Our own pages: custom figurines, custom figurine from a photo, the couple figurine, the Captain America figurine, the Anteriad figures and the 3D figurines service.
Frequently asked
What is the difference between an action figure and a figurine?
An action figure is poseable: its limbs move at joints. A figurine is a fixed figure in one pose. The figures we make of people are figurines, printed in resin or in colour from your photos, and hand-painted in the painted styles.
How tall is a 1:12 action figure?
About 6 inches, or 152 mm. At 1:12, one inch of figure stands for one foot of person, so a 6-inch figure stands for someone 6 feet tall. A 1:6 figure is about 12 inches, or 305 mm.
Can you make a jointed figure with moving arms and legs?
We do not list one, and none of our project pages shows one. If you need a posable figure, send the height, the joints you want and how many figures, and a person will tell you plainly what is possible.
Can I choose the pose of my figure?
Yes. The artwork stage includes two rounds of changes, and pose is one of the things you can change. Once you approve the artwork and the 3D preview, the pose is fixed in the print.
How tall is a custom figure of a person?
Hand-painted figures are priced by size, up to 15 cm or up to 20 cm. For a 1.8 m person, 15 cm is about 1:12 by height. The faces and bodies are stylised, so read it as a height rather than an exact scale.
How long does a custom figure take?
A hand-painted figure takes about four weeks from the moment you approve the 3D preview, and a colour-printed one about a week. The artwork and preview rounds come first and move at your pace. Tell us your date.
Can I order a batch of the same figure for an event?
Yes. For 20 or more identical figures we cast from a silicone master. The Anteriad run was 40 figures about 120 mm tall, each in its own window box, modelled in 3D from the client's concept art.
Can you make a character from a film or comic?
Those characters belong to their owners, so the right to use one is yours to have. We made a hand-painted Captain America for Colorverse, in a mid-throw pose on a rubble base. Tell us the character and what the figure is for, and a person tells you what is possible.








