Additive Inn
Get instant quote

What personalised gift can you make for someone?

By Dalmia Adithya
On this page
A small hand-painted figurine of a smiling monk sitting in a red lotus flower on a round brown base

Gifts we made for one person each: birthdays, anniversaries, weddings, graduations and new parents. What it was, what we needed, how long it took.

At a glance

GiftOccasionMade inWhat we needed
A figure from a pictureBirthday, any milestoneResin, painted by handA picture, then the artwork approval
A figure holding the ringEngagement3D print, paintedThe idea and the ring box size
A couple from one photoAnniversary, weddingWhite resin printOne photo of the two of them
A wedding photo on acrylicWedding, Valentine’s DayUV print on acrylic, black PLA baseThe photo and the message
A photo trophyBirthday, anniversaryUV print, printed baseA HD photo and the words
A model of what they loveRetirement, a careerSLA print on an acrylic rodPhotos of the real thing
Engraved keychain, tag or tumblerGraduation, Mother’s Day, birthdayLaser engravingA name and a drawing

A figure from a picture

Our first Mini Me was a monk meditating on a lotus, 100 mm tall, from a client’s picture. 4 takes on the face in each round of artwork, then the 3D model, then painted by hand. 4 days from the first artwork to collection, display case included. See the monk figurine.

The finished hand-painted monk figurine on its red lotus base, inside a clear acrylic display case
The same figure, printed and painted by hand.

Start a Mini Me from your photos

For the proposal

A Pop Mart style figure in pastel gradients, holding a ring box with its own lid. The ring sits in the black cushion inside. Presenting the ring first, then it stays on the shelf. See the engagement figure.

A hand-painted figure in a mint cap and shirt holding an open ring box with a ring inside
A bespoke figure made around one moment, ring box and all.

Tell us the moment you want to keep

A couple from one photo

For a private client we sculpted a real couple in 3D from one photo. His arm round her, her head on his shoulder, his open glasses frame and her draped costume kept. Printed in white, ready to display or paint. See the couple figurine.

An unpainted 3D printed figurine of a couple embracing, the man in glasses, standing against a grey wall
Two people sculpted as one piece, shown here unpainted.

Send us the photo of the two of them

A wedding photo on acrylic

A couple’s wedding photo UV printed on clear acrylic, cut to their outline, standing in a black base with a personal message. It was a rush, so we asked: do you have a specific font or an AI file with the custom message? This will reduce the back and forth and meet the rush timeline. Then we sent a font similar to what they shared, and the message went at a similar location as their reference image. Ready before Valentine’s Day. See the wedding photo keepsake.

Send us the photo and the message

A photo trophy for a birthday or anniversary

A customer wanted a photo trophy with “Forever 28” at the bottom, below the picture. We had 2 designs for review. Can I trouble you to send a HD image of this? It was still quite low, which will affect the quality of the print, so we asked them to upscale the image for a better print. Printed and assembled the next day, and the trophy flew off with them. If you don’t mind, share some photos when you gift it!

Send us a HD photo and the words

A model of what they love

A display model of the RSAF’s Heron 1 drone in flight, as a gift, from photos of the real aircraft with no 3D file. As the model is AI generated, we have limited control over the exact output, so we did up a render of the Heron 1 with its stand to show first. Then we upgraded the fabrication from FDM to SLA for a better quality finish, and kept the thin nose probe and the antenna mast intact. Ready a week before the deadline. See the Heron 1 model.

Send us photos of the real thing

Engraved gifts: keychains, tags and tumblers

For a graduation, Mother’s Day or a birthday, a name and a small drawing on something they use every day. Engraving is cut into the surface, so it survives every wash.

A blue stainless steel tumbler with OWN YOUR STRENGTHS laser engraved on the side
An engraved line is cut into the surface, so it survives every wash.
A round birch plywood plaque laser engraved with a baby name in script, the birth date, time and weight, on a nursery shelf beside a folded muslin cloth
For new parents: a name plaque in birch plywood with the name, date, time and weight.

Browse engraved gifts

Cake toppers

For Mother’s Day we cut toppers for The Atelier & Co in 2 mm silver mirror acrylic: Best Mum Ever hearts, I love Mum picks and a full A to Z letter set, each in one piece with its pick. Acrylic toppers are not food safe, so sleeve the stakes. For a figure on the cake, a Mini Me stands on its own base. See the Mother’s Day toppers.

Send us the wording and the date

Christmas, housewarming and weddings

Christmas has its own gift guide with the order-by dates. Moving house: housewarming gifts. Going to a wedding: wedding gifts. For the office, see corporate gifts.

Frequently asked

How fast can you make a personalised gift?

Our first Mini Me took 4 days from the first artwork to collection, display case included. A photo keepsake for Valentine's Day we did as a rush job. Tell us the date when you message us.

What do you need from me?

A HD photo, the name or message, and the date. If the photo is low resolution it will affect the quality of the print, so we will ask you to send a better one or upscale it.

Can I see it before it is made?

Yes. For a figure you approve the artwork and the 3D preview first. For a photo piece we send the design, usually 2 options, for you to pick.

Can you send it straight to them?

Yes, a Mini Me can go out in a gift box. Self collection is also fine, you can check it before you gift it.

Chat with us