Laser-engraved serving boards for Osteria Mozza
Osteria Mozza's logo, laser-engraved on 90 wooden serving boards for OUE's restaurant at ION Orchard, after eleven test settings on a spare board.
- Client
- Osteria Mozza (OUE)
- Service
- Laser Engraving & Cutting
- Also used
- Laser cutting & stickers
- What they got
- Their logo engraved on 90 serving boards
- Placement
- 10 mm from the bottom edge, 5 mm from each side
- Finish
- Plain engraving, no colour or coating
- Serving boards engraved, one logo on each
- 90
- Engraving settings tested before the batch
- 11
- Logo length, scaled to fit a 200 mm board
- 190 mm
What we brought
What we can do
We test on your material first
Eleven settings on a spare board let the restaurant choose the depth from real wood, not a screen.
How we look after you
We tell you what will last
We flagged that a red colour fill would wash out, as the printed logos on their old boards had.
What you get
A mark that survives the kitchen
A month after delivery, the restaurant told us the engraving was holding up through heavy washing.
Gallery
The whole project at a glance. Drag or swipe to browse; tap a picture to enlarge it.
1 / 9
-
The finished piece
-
The logo along the board's short end.
-
A close look along the engraving.
-
The artwork and the settings · First designDrawingThe logo artwork, in two styles.
-
The artwork and the settings · Eleven settingsEight single settings, faint to dark.
-
Three mixed settings for extra depth.
-
The artwork and the settings · PositionThe new position, marked on the board.
-
The sampleThe approved sample, logo at the bottom.
-
Engraving the batchThe batch, packed in five boxes.
The build
How we built it
5 steps, from the brief to the finished piece. Pick a step to jump to it.
The brief
Step 1 of 5 · 20/07/2026
- Boards
- 90, supplied by the restaurant
- Logo
- The Osteria Mozza wordmark, scaled to 190 mm
- Position
- 10 mm from the bottom edge, 5 mm from each side
- Finish
- Plain engraving, with no colour fill or oil
At Additive Inn, our 3D printing studio in Singapore, we laser-engraved 90 wooden serving boards for OUE's Osteria Mozza at ION Orchard. The printed logos on their old boards had worn off with washing, and these boards came from overseas with no spares.
The artwork and the settings
Step 2 of 5 · 20/07/2026
We engraved the restaurant's own logo artwork. Before any board in the batch, we tested how deep the laser should burn on a spare board, so the team chose from real samples.
-
First design
The logo artwork, in two styles.
Drawing
-
Eleven settings · 20/07/2026
Eleven depths on a spare board, from a light etch to a deep burn, each labelled with its code.
Photo +1 more
-
Position · 24/07/2026
The restaurant chose A55+35 along the board's short end, 10 mm up and 5 mm in.
Photo
The sample
Step 3 of 5 · 24/07/2026
We engraved the chosen setting on one more spare board, in its final place. The restaurant checked it with the brand's team in Los Angeles and approved it on 31/07/2026.
Engraving the batch
Step 4 of 5 · 07/08/2026
The 90 boards reached us on 07/08/2026. We engraved each to the approved sample and packed them in five boxes on 18/08/2026.
The final build
Step 5 of 5 · 21/08/2026
We delivered the boards to the restaurant on 21/08/2026, in time for a tasting that evening. A month later, its team told us the engraving was holding up through heavy washing.
More production runs
See all production runs →-
SE Manufacturing ARC computer case parts for SE Manufacturing Parts for SE Manufacturing's ARC computer case, made in MJF nylon from the client's own CAD files, primed and sprayed matt silver-grey. -
Brandt 3D printed fridge covers for Brandt A thousand snap-in fridge covers for Brandt, modelled from the sample they brought us and 3D printed in white. -
Reverse-engineered vent parts for S-Cool Services Four vent parts rebuilt in CAD from S-Cool Services' own samples, one redesigned with straight slats, then 3D printed in PLA in white and black.