Small character figurines, printed and painted

Five character figurines from separate jobs: Urd, Yura and a workman left in plain grey resin, and Hidan and Mosquito Man primed and painted by hand.

Service: Custom 3D Figurines
What it is: Five character figurines, shown together
What they are made of: Grey resin, or 3D printed and painted by hand
Detail: Feathers, crystals, scythe blades and a hard hat that lifts off

Commission a figurine Send a brief

Figurines on this page: 5
Primed and painted by hand: 2

What we brought

What we can do
Fine detail that holds
Urd's feathers, Yura's thin cape, the workman's collar and Mosquito Man's ribbed cables all print crisp.
How we look after you
Printed from your own file
For Hidan, the client sent the 3D file and asked us to print it and paint it.
What you get
Plain or painted, your call
Left in grey resin, ready for your own paint, or primed and painted by hand in the character's colours.

Gallery

The whole project at a glance. Drag or swipe to browse; tap a picture to enlarge it.

1 / 16

The finished piece
Urd, finished on 02/08/2022.
Yura, sword raised overhead.
Plain grey resin, no paint.
Hidan, finished on his base.
The triple-bladed scythe.
The workman, full length.
Beside a model house, for scale.
From above, on its round base.
The crested head and ribbed chest.
ProductionUrd's feathers, bird and staff in resin.
Yura's base of jagged crystals.
The workman's hard hat, collar and vest.
Priming, painting and packingHidan's red clouds, outlined in white.
Mosquito Man's lime green staff head.
Urd, wrapped and boxed with padding.

The build

How we built it

4 steps, from the brief to the finished piece. Pick a step to jump to it.

The brief

Step 1 of 4

Urd: From Ah! My Goddess, in grey resin, with feathered wings, a bird and a spiked ring staff
Yura: A small figure in grey resin, sword raised, on a base of jagged crystals
Hidan: From Naruto Shippuden, printed from a private client's own 3D file and painted
Workman: A standing figure in grey resin, with a hard hat that lifts off
Mosquito Man: A tabletop miniature with a staff and a banner, painted by hand

At Additive Inn, our 3D printing studio in Singapore, we make character figurines to order. This page brings together five separate figures, each needing fine detail at a small size.

Production

Step 2 of 4

Urd, Yura and the workman were printed in grey resin, which holds every feather in Urd's wings, the jagged crystals of Yura's base, and the collar, vest edges and fingers of the workman. His hard hat was printed as a separate part. Hidan was printed from the client's file, and Mosquito Man's figure, staff, banner and round base were 3D printed with the ribbed cables, the ringed staff and the banner's panels kept sharp enough to pick out in paint.

The upper half of the grey resin Urd figure: the spiked ring staff held out to the left, a bird on her hand and feathered wings at her shoulders — Urd's feathers, bird and staff in resin.

Close-up of the Yura figurine's base: a ring of jagged grey resin crystals around the figure's feet — Yura's base of jagged crystals.

Close-up of the grey resin workman's head and chest: the hard hat with its ridges and brim, the collar and the open vest — The workman's hard hat, collar and vest.

Priming, painting and packing

Step 3 of 4

Hidan and Mosquito Man were primed, then painted by hand. Hidan has a black cloak with a red lining, red clouds outlined in white, grey swept-back hair and red scythe blades. Mosquito Man's silver armour fades into teal, purple and blue, with a lime green staff head and a textured red earth base. The workman's hard hat sits on without glue, and Urd was wrapped in film and boxed with padding so her thin staff and wings travel safely.

Close-up of the painted Hidan figure from the waist up: grey swept-back hair, red collar lining and a red cloud outlined in white on the black cloak — Hidan's red clouds, outlined in white.

Close-up of Mosquito Man's lime green staff head, shaded darker at the edges, above a silver ringed collar on the shaft — Mosquito Man's lime green staff head.

The Urd figure from behind, wrapped in clear film above an open box of padding, the two large feathered wings and the staff in view — Urd, wrapped and boxed with padding.

The final build

Step 4 of 4

Five finished figures, each on its own base or feet. Urd stands tall with her wings behind her and the staff held out to one side. The rest are shown below, one by one.

The finished grey resin Urd figure from the front, one hand holding the staff and a bird perched on the other — Urd, finished on 02/08/2022.

Urd

Urd from Ah! My Goddess in grey resin, finished on 02/08/2022: feathered wings, a bird on one hand, a spiked ring staff and a gown falling to her feet.

Yura

A small Yura figurine, finished on 26/08/2022 and left in plain grey resin with no paint, so the print itself shows: the sword hilt, the hair, the buckles and the thin edges of the cape. It is small enough for a desk.

The grey resin Yura figurine from the front, the cape sweeping out to both sides above the crystal base — Plain grey resin, no paint.

Hidan

Hidan from Naruto Shippuden for a private client, who sent the 3D file on 07/09/2022 and asked us to print it and paint it. Finished on 14/11/2022: Hidan in his cloud-patterned cloak, one hand raised, with the triple-bladed scythe resting beside him on the base.

Close-up of the three curved red scythe blades joined by dark rings on the shaft, beside the round base — The triple-bladed scythe.

Workman

A standing workman in plain grey resin: hard hat, collared shirt and open vest, arms at his sides. The hard hat lifts off and goes back on. We checked the figure over by hand before it went out.

The workman figurine standing beside a small model house with a red roof and yellow walls — Beside a model house, for scale.

Mosquito Man

A tabletop miniature known in our studio as Mosquito Man: a robed, robot-like figure leaning on a tall staff beside a purple and silver banner, on a red earth base with a black rim, ready for the table or the shelf.

The finished miniature seen from above at an angle, the silver crest, teal limbs and round red earth base in view — From above, on its round base.

Close-up of the miniature's silver crested head and ribbed chest, a green glow in the face and teal and purple on the arms — The crested head and ribbed chest.

More figurines & props

See all figurines & props →

Small character figurines, printed and painted

What we brought

Fine detail that holds

Printed from your own file

Plain or painted, your call

Gallery