Marina Bay Sands Scale Model, 3D Printed

Marina Bay Sands scale model

Marina Bay Sands and a large lattice dome, split into many smaller prints, printed in white PETG and joined into two big models.

Service

Scale Models

In the order

Marina Bay Sands, a dome building and a Ferris wheel

Made from

The client's 3D files, split, printed and assembled

What we brought

Large models

We print models bigger than any printer bed

The dome was split into many smaller prints, then joined back into one shell.

Fine detail

The facade detail stays crisp at scale

Window grids on the three towers and the dome's lattice ribs print sharp in white PETG.

From your files

Send your 3D files and we do the rest

We split the client's files into printable parts, printed them and assembled each model.

The brief

Step 1 of 4

Material: White PETG, 25% infill
Scope: Split, print and assemble

At Additive Inn, our 3D printing studio in Singapore, we 3D printed three Singapore landmarks from the client's own files: Marina Bay Sands, a dome building and a Ferris wheel. Each needed splitting into printable parts, printing in white PETG and assembling.

Fabrication

Step 2 of 4

We split each model into parts that fit the print bed and printed them in white PETG. The three Marina Bay Sands towers came off the printers with every row of windows in place, ready for the SkyPark.

The three printed Marina Bay Sands towers standing on a bench before the SkyPark was fitted, window grids on every face — The three towers, before the SkyPark.

Build and assembly

Step 3 of 4

The dome went together from its sections into one shell, joined from inside so the lattice runs on across each seam. The towers took the SkyPark across their tops.

The white lattice dome on a workbench with its arched opening at the front, the seams between its printed sections showing as fine lines — The dome, joined from its printed sections.

Inside the dome shell: the smooth white underside with filled patches where the printed sections meet — Inside the shell, where the sections meet.

Close-up of the dome's lattice with faint joint lines between sections, beside the window grid of one Marina Bay Sands tower — Raw print texture and the joint lines.

The final build

Step 4 of 4

Marina Bay Sands and the dome, printed and assembled in white, side by side in our studio.

Marina Bay Sands scale model

What we brought