Additive Inn
Get instant quote

Custom 3D printed golf putter head

A putter head designed from scratch: a 3-degree loft, two pockets that set its mass, and the loft and mass marked on the back.

Client
Private client
What it is
A one-piece putter head, ready for a shaft
Set by design
A 3.0° loft and a 324 g target mass
Made personal
A face panel for initials or a logo
Plan a custom part (opens WhatsApp) Send a brief
Head length, heel to toe
117.8 mm
Loft, marked on the back of the head
3.0°
Target mass, marked beside the loft
324 g
Pockets inside the head that control its mass
2

What we brought

  1. What we can do

    We design the numbers in

    The loft is drawn to the degree, and two pockets inside set the mass marked on the back.

  2. How we look after you

    You see every round before it is made

    Each revision came as dimensioned drawings and renders, with the 3D file to open and check.

  3. What you get

    Your name or logo on the face

    A framed panel on the face takes initials or a logo, laser engraved into the finished head.

The build

How we built it

5 steps, from the brief to the finished piece. Pick a step to jump to it.

The brief

Step 1 of 5

Length
117.8 mm, heel to toe
Depth
29.9 mm, face to back
Height
24.7 mm at the back
Loft
3.0°

At Additive Inn, our 3D printing studio in Singapore, we designed a custom golf putter head for a golfer. It needed a set loft, a controlled mass and room on the face for their initials.

Design and prototyping

Step 2 of 5

We modelled the head in 3D and drew every revision with its dimensions: a 117.8 mm blade with small crosses across the face. The final round added two pockets to control the mass and marked the loft and grams on the back.

  1. First design

    The first design, back and face.

    Render

  2. First design · 26/09/2023

    A solid head with a short 9 mm socket for the shaft and small crosses across the face.

    Drawing +1 more

  3. Final design · 27/09/2023

    Two pockets control the mass, a 34 mm post replaces the socket, and the back shows loft and grams.

    DrawingRender +2 more

Production

Step 3 of 5

The head was 3D printed in one piece from the final model, with the two pockets, the hosel post and the 3.0 | 324 marking built in.

The back, as modelled.

Finishing

Step 4 of 5

The head has a matt silver finish. Our logo is laser engraved into the framed panel on the face, where the golfer's initials would go.

The laser-engraved panel on the face.

The final build

Step 5 of 5

A one-piece putter head with its loft and mass on the back, two pockets setting its weight and a laser-engraved face, ready to take a shaft.

The finished face on its stand.

More product development

See all product development →
Chat with us