Additive Inn
Get instant quote

Shell design for VogaMax salon machines, two versions

VogaMax came back to us for a second machine: after the S2 concept in 2025, a slimmer wash and mist shell in 2026, refined round by round into its final form.

Client
VogaMax
Scope
Design only
What it is
The outer shells of VogaMax salon machines
Started from
The client's existing machines, measured at our studio
What the client got
Shell designs as 3D CAD, STEP and STL
Jobs for the same client, 2025 and 2026
2
Nozzle options in the final design
2

What we brought

  1. What we can do

    The brand's V, kept

    The front V is what makes a VogaMax machine read as one, so every version kept it while the body around it got slimmer.

  2. How we look after you

    Measured from the real machines

    The client's machines came to our studio, so the new shell was drawn around real parts and real sizes, not photos.

  3. What you get

    Designed round by round

    Each round answered the client's comments on width, surfaces and the hose, and the design moved on from one round to the next.

The build

How we built it

4 steps, from the brief to the finished piece. Pick a step to jump to it.

The brief

Step 1 of 4 · 25/04/2025

First job
VogaMax S2 concept, two cable layouts (2025)
Second job
Wash and mist machine shell (2026)
Our scope
Shell design only, as 3D CAD

At Additive Inn, our 3D printing studio in Singapore, we have designed machine shells for VogaMax, a salon equipment brand, twice.

The first job, in April 2025, was a concept for the VogaMax S2: a tall machine with a "V" running down its front, with two options for managing its cables. In July 2026 the client came back for a second machine, a slimmer wash and mist unit that carries the S2's look. This page follows that second job, round by round. Both times the work was the shell's shape only, delivered as 3D CAD.

First concepts, slim and mini

Step 2 of 4 · 29/07/2026

The client's machines came to our studio, so we measured them directly and drew the new shells around the parts they have to hold. The first round carried the S2's large chamfers, tilted screen and rear handle onto slim bodies, each in a full-height and a shorter "mini" size, with a waste water tank inside and either two misting nozzles or one.

The client's comments on this round, slimmer and cleaner with less sculpting, set the direction for the next.

DrawingA slim concept with two nozzles, 691 mm tall.
DrawingThe same body with a single nozzle.
DrawingThe mini, a little over half a metre tall.
DrawingThe mini with a single nozzle.

Settling the direction, revision 3

Step 3 of 4 · 06/08/2026

We sat down with the client at our studio, with our designer in the room, to settle the direction. A few points held through every round from then on: keep the front V, stay slim rather than bulky, use clean modern surfaces over sculpted curves, keep the centre of gravity low so it stands steady, and make it read as a salon machine.

Revision 3, on 11 August, was a wider body with two curved misting arms on top, a lid over the water tanks, a top-up funnel and a waste tank that lifts out. The client asked for it slimmer, with a single hose outlet, and to see the hose at the top, which became the final round.

RenderRevision 3, from a front corner.
RenderWith the V face and logo.
RenderRevision 3, the V face front on.
RenderFrom the side.
RenderFrom behind.
DrawingWhat sits inside the shell, called out.
RenderThe two hoses at the back.
RenderThe waste tank behind its door.
RenderThe clean water tank, from above.

Two nozzle options

Step 4 of 4 · 13/08/2026

The last round gave the client the slimmer shell with a single hose in two versions, so they could judge how each would be used at the basin: the nozzle mounted at the back, or on top. Each came with renders and an animation of the lid and the door opening to the tanks. The shells went to the client as 3D CAD.

RenderOption 2, the nozzle on top.

Option 1: the nozzle at the back

RenderOption 1, the nozzle at the back.
RenderOption 1 in motion, the lid, the door and the waste tank.
RenderFrom a back corner, opened up.
RenderThe hose at the back.
RenderThe waste tank slides out.
RenderOut by its handle.

Option 2: the nozzle on top

RenderOption 2, from a back corner, opened up.
RenderThe hose from the top.
RenderThe same tank door on both options.

More product development

See all product development →
Chat with us