3D printed replacement brackets for a projector mount
Replacement corner brackets for a projector mount, modelled from the client's broken part and 3D printed in black as a batch of four.
- Service
- Industrial 3D Printing
- Started from
- The client's original bracket, broken in two at the corner
- Made as
- One L-shaped piece, like the original
- Fixings
- Metal threaded inserts set into each bracket
What we brought
What we can do
A part modelled from the broken original
We measured both halves of the client's cracked bracket and rebuilt the whole L-shape in CAD.
How we look after you
Checked against the part it replaces
Each new bracket follows the original's profile, grooves and fixing holes, checked beside the broken part.
What you get
Ready to bolt straight back in
Metal threaded inserts are set into every bracket, so the screws go straight in, as with the original.
Gallery
The whole project at a glance. Drag or swipe to browse; tap a picture to enlarge it.
1 / 12
-
The finished piece
-
A finished bracket, inserts fitted.
-
Four inserts along the two arms.
-
The briefThe client's bracket, broken in two.
-
Measuring and modelling · First designRenderThe bracket, modelled as one piece.
-
RenderThe extrusion profiles stacked on the bracket.
-
RenderThe bracket from above.
-
RenderNuts embedded under the fixing holes.
-
RenderThe underside of the bracket.
-
ProductionThe batch of four brackets.
-
Inserts and checksMetal threaded inserts set into the face.
-
The new bracket beside the broken original.
The build
How we built it
5 steps, from the brief to the finished piece. Pick a step to jump to it.
The brief
Step 1 of 5
At Additive Inn, our 3D printing studio in Singapore, we made replacement brackets for a projector mount. The client's L-shaped bracket had cracked through at the corner, and they needed new ones that fit in its place, on the same screws.
Measuring and modelling
Step 2 of 5
We measured both halves of the broken bracket and modelled the whole L-shape in CAD as one piece, with its stepped edges, grooves and fixing holes. The exploded view shows the aluminium extrusion profiles stacked and bolted onto it.
-
First design
The bracket, modelled as one piece.
Render +1 more
-
First design · 01/02/2024
The full bracket from above and below, with nuts embedded under the fixing holes for the profile screws.
Render +2 more
Production
Step 3 of 5
We 3D printed the new brackets in black, a batch of four from the one model, so every bracket is the same shape.
Inserts and checks
Step 4 of 5
We set metal threaded inserts into the fixing holes of each bracket, then checked the new part against the broken original: the same profile, grooves and hole positions.
The final build
Step 5 of 5
The client got four new brackets, each in one piece with its inserts fitted, ready to bolt back into the projector mount in place of the broken one.
More production runs
See all production runs →-
Replacement latch arm for a motorcycle box A one-off replacement latch arm for a motorcycle box, modelled from the worn original and 3D printed in black. -
Reverse-engineered strap buckle A replacement side-release buckle, modelled from the original in two parts and 3D printed in white, that clips shut and lets go by hand.